h3c路由器上网配置？

必配||<RouterA>sys[RouterA] interface ethernet 0/0 外网口[RouterA-Ethernet0/0] ip address 169.253.1.129 30 外网ip[RouterA-Ethernet0/0] quit[RouterA] interface ethernet 0/1 内网口[RouterA-Ethernet0/0] ip address 192.168.1.1 24 内网ip[RouterA-Ethernet0/0] quit[RouterA] dhcp server ip-pool 1 dhcp地址池[RouterA-dhcp-pool-1] network 192.168.1.1 24[RouterA-dhcp-pool-1] dns-list 1.1.1.1 配置dns 此处看你外网线路的运营商管他们要dns[RouterA-dhcp-pool-1] gateway-list 192.168.1.1 网关[RouterA-dhcp-pool-1] quit[RouterA] acl number 2000[RouterA-acl-basic-2000] rule 10 permit [RouterA-acl-basic-2000] quit[RouterA] interface ethernet 0/0[RouterA-Ethernet0/0]nat outbound 2000 配置 nat[RouterA-Ethernet0/0] quit[RouterA] ip route-static 0.0.0.0 0.0.0.0 169.253.1.130 配置去外网的默认路由可选||以下配置用作远程登录，方便管理[RouterA] telnet server enable 开启telnet服务[RouterA]local-user admin 远程登录用户名[RouterA-luser-admin] service-type telnet[RouterA-luser-admin]password simple 123456 远程登录密码[RouterA-luser-admin]authorization-attribute level 3[RouterA-luser-admin]quit[RouterA]user-interface vty 0 4[RouterA-vty0-4]authentication-mode scheme[RouterA-vty0-4]quit最后配置完一定要保存配置，不然一重启配置就没有了[RouterA]save出现选择选 y